No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change multichannel

change multichannel

Function

The change multichannel command is used to modify the status of multichannel of a protocol cluster.

Format

change multichannel <status>

Parameters

Parameter

Description

Value

status Multichannel switch.

open:turn on the switch of multichannel

close:turn off the switch of multichannel.

Level

Resource administrator

Usage Guidelines

None

Example

Change the status of the multichannel of a protocol cluster.

admin:/>change multichannel open
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27684

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next