No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change vise_cfg general

change vise_cfg general

Function

The change vise_cfg general command is used to change the system configuration of VISE.

Format

change vise_cfg general <redundance>

Parameters

Parameter

Description

Value

redundance Cluster redundancy ratio of the system.

+0 +1 +2 +3.

Level

Resource administrator

Usage Guidelines

You can run the change vise_cfg general command to change the system configuration of VISE.

Example

Change the system redundancy ratio of VISE.

admin:/>change vise_cfg general +3
DANGER: You are about to modify the system configuration. If the parameter settings are incorrect, the VISE(Video and Image Semantics Engine) services may be interrupted.
Have you read danger alert message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25197

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next