No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ntp general

show ntp general

Function

The show ntp general command is used to query the NTP service information of a cluster.

Format

show ntp general

Parameters

None

Level

Device administrator

Usage Guidelines

None

Example

Query the NTP service information of a cluster.

admin:/>show ntp general
 
  Switch         : On          
  Server         : 192.168.100.10 
  Version        : V4           
  Standby_Server : 192.168.100.11

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Switch

NTP service status. By default, the NTP service is disabled.

Server

NTP server address.

Version

NTP protocol version, the default protocol version is V4.

Standby_Server

Address of the standby NTP server.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24423

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next