No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change applat auth_flag

change applat auth_flag

Function

The change applat auth_flag command is used to change the authentication policy of a comprehensive video and image application system and change the username and password in this authentication mode.

Format

change applat auth_flag <applicationPlat_id> <auth_flag> <passwd_rule> <user_name>

change applat auth_flag <applicationPlat_id> <auth_flag>

Parameters

Parameter

Description

Value

applicationPlat_id The comprehensive video and image application system ID.

The value is a string of 1 to 20 characters excluding the slash (/) and cannot be a period (.) or two periods (..). \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

auth_flag Authentication flag.

Needless: Authentication is not required. BasicAuth: The basic authentication mode is required.

DigestAuth: The digest authentication mode is required.

Hmac: The Hmac authentication mode is required.

passwd_rule Password rule.

inner: Internal rules must be complied with (the length complies with the value set in the security policy, that is, 8 to 64 characters). The password must contain special characters and at least two types of the following characters: uppercase letters, lowercase letters, and digits. The value cannot be the same as or reverse of the user name. A maximum of three consecutive repeated characters are allowed. outer: External rules must be complied with (1 to 64 characters).

user_name User name of the comprehensive video and image application system.

The value is a string of 1 to 64 characters. \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

password Password of the comprehensive video and image application system.

Character string (checking the password validity based on the password rule).

old_password Old password of the comprehensive video and image application system.

The old password is used to check whether the password of the camera is the same as that in the database.If the previous authentication mode is Needless, you do not need to enter it.

Level

Resource administrator

Usage Guidelines

You can run the change applat auth_flag command to change the authentication policy of a comprehensive video and image application system and change the username and password in this authentication mode.

Example

  • Change the authentication mode of a comprehensive video and image application system from Needless to Basic.

    change applat auth_flag app001 BasicAuth inner user
    Please enter your new password:**********
    Please enter your new password again:**********
    Please enter your old password:
    CAUTION: You are about to modify the authFlag parameter. If the parameter settings are incorrect, the comprehensive video and image application system may fail to download image data.
    Suggestion: Ensure the authFlag parameter  is the same as that of the comprehensive video and image application system.
    Do you wish to continue?(y/n)y
    Command executed successfully.
  • Change the authentication mode of a comprehensive video and image application system to be authenticated to Needless.

    admin:/>change applat auth_flag app001 Needless
    Please enter your old password:**********
    CAUTION: You are about to modify the authFlag parameter. If the parameter settings are incorrect, the comprehensive video and image application system may fail to download image data.
    Suggestion: Ensure the authFlag parameter  is the same as that of the comprehensive video and image application system.
    Do you wish to continue?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24706

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next