No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication channel

show remote_replication channel

Function

The show remote_replication channel command is used to query channels in remote replication zone.

Format

show remote_replication channel [id=?]

Parameters

Parameter

Description

Value

id Channel ID

The value is an integer ranging from 0 to 4294967294.

Level

Resource administrator

Usage Guidelines

Read-only users can also run this command to view information.

Example

  • Query channels in remote replication zone.

    admin:/>show remote_replication channel
     
      ID ChannelName HealthStatus RunningStatus IsInitiator TargetIp      TargetUserName LocalZoneName      RemoteZoneName     RemoteSystemName RemoteSystemESN
      -- ----------- ------------ ------------- ----------- ------------- -------------- ------------------ ------------------ ---------------- ------------------------
      0  channel_79  Normal       LinkUp        Yes         192.168.91.29 _machine_user  rnmDefaultZoneName rnmDefaultZoneName Cluster10GE      Cluster10GE1431395231072
  • Query single channel in remote replication zone.

    admin:/>show remote_replication channel id=0
     
      ID                   : 0                          
      ChannelName          : Channel_79                
      HealthStatus         : Normal                     
      RunningStatus        : LinkDown                   
      IsInitiator          : Yes                        
      TargetIp             : 192.168.91.29               
      TargetUserName       : _machine_user              
      BandwidthLimitSwitch : Off                        
      BandwidthLimitSize   : --                         
      BandwidthLimitUnit   : --                         
      LocalZoneName        :                 
      RemoteZoneName       :                 
      RemoteSystemName     :                   
      RemoteSystemESN      : Cluster10GE1431395231072

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Channel ID

ChannelName

Channel name

HealthStatus

Health status

RunningStatus

Running status

IsInitiator

Originating end

TargetIp

Channel authentication IP

TargetUserName

Remote cluster user name

LocalZoneName

Local replication zone

RemoteZoneName

Remote replication zone

RemoteSystemName

Remote cluster name

RemoteSystemESN

Remote cluster ESN

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24892

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next