No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change raalign

change raalign

Function

The change raalign command is used to enable or disable prefetch enablement determination based on strip alignment methods.

Format

change raalign < status >

Parameters

Parameter

Description

Value

status Indicates whether to enable prefetch enablement determination based on strip alignment methods.
  • "on": enables prefetch enablement determination based on strip alignment methods.
  • "off": disables prefetch enablement determination based on strip alignment methods.
The default value is off.

Level

Administrator

Usage Guidelines

None

Example

Enable prefetch enablement determination based on strip alignment methods.

admin:/>change raalign on
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27438

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next