No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ndmp_service username

change ndmp_service username


The change ndmp_service username command is used to change the username of the NDMP service.


change ndmp_service username < user_name >





user_name NDMP username

The new user name. The value is a character string that is 1 to 31 characters in length and include letters, numbers, underscores (_), hyphens (-), and periods (.). It cannot end with hyphens (-), underscores (_), or periods (.).

password NDMP password

The new password must contain special characters and is 8 to 31 characters in length. It cannot be the username in reversed order.


Resource administrator

Usage Guidelines



Change the username of the NDMP service.

admin:/>change ndmp_service username aa
Please enter your password:************
WARNING: After the username or password is changed, ongoing services may be interrupted and backup servers must re-authenticate this user.
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24836

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next