No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset camera password

reset camera password

Function

The reset camera password command is used to reset the password of a camera.

Format

reset camera password <camera_id>

Parameters

Parameter

Description

Value

camera_id Camera ID.

The value is a string of 1 to 20 characters excluding the slash (/) and cannot be a period (.) or two periods (..). \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

admin_password Super admin password.

The super administrator password is used to check whether the password of the super administrator is the same as the password of the super administrator in the cluster.

password Camera password.

The value is a string of 1 to 64 characters. \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

Level

Super administrator

Usage Guidelines

You can run the reset camera password command to reset the password of a camera.

Example

Reset the password of a camera.

admin:/>reset camera password camera001
Please input the super_admin password:**********
Please enter your new password:******
Please enter your new password again:******
DANGER: You are about to reset the password parameter. If the parameter is incorrectly modified, receiving picture may be interrupted.
Have you read danger alert message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.
 

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27559

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next