No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change infoequalizer business_iface_min_dynip

change infoequalizer business_iface_min_dynip

Function

The change infoequalizer business_iface_min_dynip command is used to change the number of floating IP addresses assigned to front-end service ports in a protocol cluster.

Format

change infoequalizer business_iface_min_dynip <number>

Parameters

Parameter

Description

Value

number The number of floating IP addresses assigned to front-end service ports.

The value is integer and is from 1 to 16.

Level

Device administrator

Usage Guidelines

None

Example

change the number of floating IP addresses assigned to front-end service ports in a protocol cluster.

admin:/>change infoequalizer business_iface_min_dynip 4
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24808

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next