No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system localtime

change system localtime

Function

The change system localtime command is used to change the system time.

Format

change system localtime < new_sys_time >

Parameters

Parameter

Description

Value

new_sys_time Time.

The value is in the following format: yyyy-mm-dd/HH:MM:SS. The time must be between 2000-01-01 08:00:00 and 2035-12-31 23:59:59.

Level

Device administrator

Usage Guidelines

None

Example

Change the system time.

admin:/>change system localtime 2014-01-14/22:05:00
WARNING: You are about to change the system time.
This operation may adversely affect authorization, CDRs, performance statistics and lead to a one-minute object storage service interruption.
Suggestion: Before performing this operation, ensure that the time needs to be changed.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25382

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next