No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change infoequalizer zone domain

change infoequalizer zone domain


The change infoequalizer zone domain command is used to modify the domain name of a protocol cluster zone.


change infoequalizer zone domain < id > < domain >





id Zone ID of a node in a protocol cluster.

The value contains 3 to 80 letters, digits, hyphens (-), underscores (_), and periods (.), and must start with a letter and end with a letter or a digit.

You can press Ctrl+A to view the available values of id.

domain Domain name.

The value is a character string consisting of letters, numbers, periods (.), and hyphens (-). Each level of the domain name consists of a maximum of 63 characters, and levels are delimited by dots (.). The domain name (including dots) and that of the domain name it belongs to combined must not exceed 253 characters in length. Each level cannot start or end with a hyphen (-).


Device administrator

Usage Guidelines



Modify the domain name of a protocol cluster zone.

admin:/>change infoequalizer zone domain admin1 admin
WARNING: You are about to change the zone domain name. After the domain name is changed, clients must use the new domain name to access the zone.
Clients that have been connected to the domain before the change are not affected.
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25117

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next