No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
start task

start task

Function

The start task command is used to immediately schedule a task.

Format

start task < task_id >

Parameters

Parameter

Description

Value

task_id Task ID.

The value is a combination of numbers, letters, underscores (_), and periods (.) and is 1 to 127 characters in length.

Level

Administrator

Usage Guidelines

  • This command can only be used for tasks that already exist in the system. Whether a task can be immediately scheduled depends on its type. All types of tasks can be configured on the CLI.
  • This command is applicable to periodic tasks whose "dispatchType" is "2" and "runningStatus" is "queuing".
  • The command prompt varies depending on the task type.

Example

Immediately schedule a task.

admin:/>start task 9223372036854775809
WARNING: You are about to start Data scrubing immediately. 
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24253

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next