No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add datasync joblist

add datasync joblist


The add datasync joblist command is used to add remote synchronization (InfoMigrator) tasks.


add datasync joblist < server > < sharedir > < sharesubdir > < localdir > < username >





server IP address of the remote server.

The value is a character string in the format of IP address or domain name. The domain name is a combination of letters, numbers, periods (.), and underscores (_). Each level of the domain name consists of a maximum of 63 characters, and levels are delimited by dots (.). The domain name (including dots) consists of a maximum of 253 characters in total. Each level cannot start or end with a hyphen (-).

sharedir Share directory of the remote server.

The value is 1 to 253 characters in length and must start with a slash (/).

sharesubdir Share subdirectory of the remote server.

The value is 1 to 253 characters in length. If there is no subdirectories, enter a slash.

localdir Directory path on the local server.

The value is 1 to 253 characters in length and must start with a slash (/). The directory must be an NFS share directory.

username Username that accesses the share directory.

The value is 1 to 126 characters in length. Note:

  • Currently, only NFS share is supported.
  • root_squash of the NFS share can only be set to no_root_squash and the user name can only be set to root.



Usage Guidelines



Add remote synchronization tasks.

admin:/>add datasync joblist /dxl_sync / /dxl_test root
Command executed successfully.

System Response


Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27439

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next