No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add infoequalizer ippool

add infoequalizer ippool

Function

The add infoequalizer ippool command is used to add the dynamic IP address of a protocol cluster to an IP address pool.

Format

add infoequalizer ippool < ip > < subNetId >

Parameters

Parameter

Description

Value

ip IP address/mask or IP address range.

The value is a character string, IP address/mask or IP address rage. For example, IP address/mask: 192.168.0.1/16; IP address range: 192.168.0.1/16-192.168.0.100/16.

subnet_id Subnet ID.

The value can only contain 1 to 127 digits.

Level

Device administrator

Usage Guidelines

  • The IP address and subnet must be on the same network segment. Run the show system subnet command to query the subnet information.
  • Restrictions on the IP address/mask

When the mask is 8, the subnet mask is an 8-bit mask, that is, 255.0.0.0. The last three bits (x.y.z) of the configured IP address (w.x.y.z) cannot be 0.

When the mask is 16, the subnet mask is a 16-bit mask, that is, 255.255.0.0. The last two bits (y.z) of the configured IP address (w.x.y.z) cannot be 0.

When the mask is 24, the subnet mask is a 24-bit mask, that is, 255.255.255.0. The last one bit (z) of the configured IP address (w.x.y.z) cannot be 0.

Example

Add protocol cluster dynamic IP addresses to the IP address pool.

admin:/>add infoequalizer ippool 192.168.0.1/16 1
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24733

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next