No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system user status_offline

change system user status_offline

Function

The change system user status_offline command is used to force system users offline.

Format

change system user status_offline < id >

Parameters

Parameter

Description

Value

id User ID.

The value is range from 1 to 4294967294.

You can press Ctrl+A to view the available values of id.

Level

Super administrator

Usage Guidelines

After this command is executed, a system user is forced offline.

Example

Force a system user offline.

admin:/>change system user status_offline 2
WARNING: You are about to log off the selected user. After this operation, the user exits. Before performing this operation, learn about the impact of this operation on the user.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24242

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next