No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear remote_replication zone_ip_range

clear remote_replication zone_ip_range

Function

The clear remote_replication zone_ip_range command is used to clear included IP segment in remote replication zone.

Format

clear remote_replication zone_ip_range <id>

Parameters

Parameter

Description

Value

id ID of remote replication zone

The value is a combination of numbers and is 1 to 128 characters in length.

Level

Resource administrator

Usage Guidelines

None

Example

Clear included IP in remote replication zone.

admin:/>clear remote_replication zone_ip_range 1
DANGER: You are about to delete the replication zone IP address segment. This operation may cause link disconnection and further service interruption.
Have you read danger alert message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24747

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next