No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change node defrost

change node defrost

Function

The change node defrost command is used to unfreeze some nodes.

Format

change node defrost < node_list >

Parameters

Parameter

Description

Value

node_list Node IDs.

The value can contain 1 to 4094 letters, digits, hyphens (-), underscores (_), and periods (.). If you want to start multiple nodes in batches, separate their IDs with vertical bars (,).

Level

Device administrator

Usage Guidelines

After this command is executed, the nodes will be unfrozen in about one minute.

Example

Unfreeze a node.

admin:/>change node defrost 12814  
Command sent successfully.Please use command 'show task general' for details.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25255

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next