No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add camera SDK

add camera SDK

Function

The add camera SDK command is used to add a camera that uses the SDK protocol.

Format

add camera SDK <camera_protocol> <camera_id> <camera_name> <camera_ip> <camera_port> <camera_lifecycle> <camera_user>

Parameters

Parameter

Description

Value

camera_protocol Camera protocol.

hikvision: Hikvision SDK

dahua: Dahua SDK.

camera_id Camera ID.

The value is a string of 1 to 20 characters excluding the slash (/) and cannot be a period (.) or two periods (..). \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

camera_name Camera name.

The value is a string of 1 to 64 characters. \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

camera_ip Camera IP address.

Valid IPv4 format.

camera_port Camera port number.

1~65535.

camera_lifecycle Camera lifecycle.

1~2147483646.

user_name Camera user name.

The value is a string of 1 to 64 characters. \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

password Camera password.

The value is a string of 1 to 64 characters.

Level

Resource administrator

Usage Guidelines

You can run the add camera SDK command to add a camera that uses the SDK protocol.

Example

Add a camera that uses the SDK protocol.

admin:/>add camera SDK hikvision camera003 cameranme 192.168.10.10 8088 60 username
Please input your password:******
Please input your password again:******
CAUTION: You are about to add a camera. Check whether the lifecycle parameter is set to a large value. If the data storage period is too long, the system capacity may be used up.
Suggestion: Ensure that the lifecycle parameter is set to a proper value.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25274

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next