No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change gprs work_mode

change gprs work_mode

Function

The change gprs work_mode command is used to change the work mode of General Packet Radio Service (GPRS) in the system.

Format

change gprs work_mode < work_mode >

Parameters

Parameter

Description

Value

work_mode GPRS work mode.

The value is "usb" or "serial_port".

Level

Administrator

Usage Guidelines

By default, the system uses the USB mode. You can set the mode based on actual connection.

Example

Change the work mode of GPRS in the system.

admin:/>change gprs work_mode usb
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24177

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next