No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change infoequalizer subnet

change infoequalizer subnet

Function

The change infoequalizer subnet command is used to modify the subnet information of protocol cluster zones.

Format

change infoequalizer subnet < zone_id > < subnet_id >

Parameters

Parameter

Description

Value

zone_id Zone ID of a node in a protocol cluster.

The value contains 3 to 80 letters, digits, hyphens (-), underscores (_), and periods (.), and must start with a letter and end with a letter or a digit.

You can press Ctrl+A to view the available values of id.

subnet_id Subnet ID.

The value can only contain 1 to 127 digits.

Level

Device administrator

Usage Guidelines

None

Example

Modify the subnet information of protocol cluster zone.

admin:/>change infoequalizer subnet zone_id 1
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24527

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next