No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 SmartKit User Guide 07

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes how to use SmartKit to perform deployment delivery, troubleshooting, and firmware upgrade.

Intended Audience

This document is intended for:

  • Technical support personnel
  • Maintenance personnel

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Supplements the important information in the main text.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue

Date

Description

07

2019-11-18

  1. Optimized some procedures and description.
  2. Added the methods of installing and upgrading subtool scenarios.
  3. Updated the compatibility lists of all functions.
  4. Added the troubleshooting of abnormal watchdog on the OS to firmware upgrade.
  5. Added the description of intermediate versions to firmware upgrade and E9000 upgrade.
  6. Added the TaiShan servers to PCIe card and hard disk firmware upgrade.

06

2019-09-12

  1. Optimized some procedures and figures.
  2. Added the description of sevice repair.
  3. Updated the compatibility lists of all functions.
  4. Added the SNMP Configuration Error guide.
  5. Added the guide for collecting the OS logs of a single server to log collection.

05

2019-08-06

  1. Optimized the description.
  2. Added the data collection service setting function in the iBMC configuration.

04

2019-06-05

  1. Optimized some procedures and figures.
  2. Added some supported models to compatibility lists of some functions.

03

2019-04-30

  1. Added screenshots of operation procedures.
  2. Optimized the description.

02

2019-04-03

  1. Supported image mounting on a KunLun server.
  2. Supported burn-in tests for V5 servers.
  3. Supported drive firmware version check during inspection.
  4. Supported log collection for ES3000 V5 servers.
  5. Supported the synchronization from HostName to SysName in the iBMC configuration.

01

2019-03-01

  1. This issue is the first official release.
Translation
Download
Updated: 2019-11-19

Document ID: EDOC1100068214

Views: 31405

Downloads: 363

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next