Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hardware Installation
This chapter describes hardware installation procedures and precautions.
- Installation Procedure
This section describes the installation procedure of the USG6000E. - Installation Preparation
This section describes the safety precautions that you must observe and the tools that must be prepared before you install the USG. - Installing a Desktop Device
This chapter provides the cabinet-mounting, workbench-mounting, wall-mounting, and cable connection methods of the USG6510E, USG6510E-POE, USG6530E. - Installing a 420 mm Deep Device
This chapter provides the cabinet-mounting, workbench-mounting, and cable connection methods of the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E series. - Installing a 600 mm Deep Device
This chapter provides the cabinet-mounting, workbench-mounting, and cable connection methods of the USG6680E, USG6712E, USG6716E series.