Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
40Gbps QSFP+ Optical Modules
- QSFP-40G-LR4 (02310MHS)
- QSFP-40G-SDLC-PAM
- QSFP-40G-SR-BD (02311FPA)
- QSFP-40G-eSR4 (02310RMB)
- QSFP-40G-iSR4 (02310MHR)
- QSFP-40G-LX4
- QSFP-40G-ER4
- QSFP-40G-LR4-Lite (02311YVB)
- QSFP-40G-LX4-MM
- QSFP-40G-eSDLC-PAM
- QSFP-40G-LR4 (02313URY)
- QSFP-40G-LR4-Lite (02313URS)
- QSFP-40G-eSM4
- QSFP-40G-eSR4 (02313URU)
- QSFP-40G-iSR4 (02313URW)
QSFP-40G-LR4 (02310MHS)
Table 4-314 QSFP-40G-LR4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-LR4 |
| Part Number | 02310MHS |
| Model | QSFP-40G-LR4 |
| Form factor | QSFP+ |
| Application standard | 40GBASE-LR4 |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | 10 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1310 nm |
| Maximum Tx optical power [dBm] | 2.3 dBm |
| Minimum Tx optical power [dBm] | -7 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -11.5 dBm |
| Overload power (AVG) [dBm] | 2.3 dBm |
QSFP-40G-SDLC-PAM
Table 4-315 QSFP-40G-SDLC-PAM specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-SDLC-PAM |
| Part Number | 02311PUU |
| Model | QSFP-40G-SDLC-PAM |
| Form factor | QSFP+ |
| Application standard | 40GBase-SDLC |
| Connector type | LC |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | - Multimode fiber (OM3) (with diameter of 50 μm): 0.1 km - Multimode fiber (OM4) (with diameter of 50 μm): 0.15 km |
| Modal bandwidth [MHz*km] | - Multimode fiber (OM3): 2000 MHz*km - Multimode fiber (OM4): 4700 MHz*km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Maximum Tx optical power [dBm] | 2.4 dBm |
| Minimum Tx optical power [dBm] | -2.5 dBm |
| Minimum extinction ratio [dB] | 3 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -8 dBm |
| Overload power (AVG) [dBm] | 2.4 dBm |
QSFP-40G-SR-BD (02311FPA)
Table 4-316 QSFP-40G-SR-BD specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-SR-BD |
| Part Number | 02311FPA |
| Model | QSFP-40G-SR-BD |
| Form factor | QSFP+ |
| Application standard | 40GBase-BD |
| Connector type | LC |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 10°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | 0.1 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm, 900 nm |
| Maximum Tx optical power [dBm] | 5 dBm |
| Minimum Tx optical power [dBm] | -4 dBm |
| Minimum extinction ratio [dB] | 4.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -4.5 dBm |
| Overload power (AVG) [dBm] | 5 dBm |
QSFP-40G-eSR4 (02310RMB)
Table 4-317 QSFP-40G-eSR4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-eSR4 |
| Part Number | 02310RMB |
| Model | QSFP-40G-eSR4 |
| Form factor | QSFP+ |
| Application standard | 40GBase-eSR4 |
| Connector type | MPO |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | - Multimode fiber (OM2) (with diameter of 50 μm): 82 m - Multimode fiber (OM3) (with diameter of 50 μm): 300 m - Multimode fiber (OM4) (with diameter of 50 μm): 400 m |
| Modal bandwidth [MHz*km] | - Multimode fiber (OM2): 500 MHz*km - Multimode fiber (OM3): 2000 MHz*km - Multimode fiber (OM4): 4700 MHz*km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Maximum Tx optical power [dBm] | 0.5 dBm |
| Minimum Tx optical power [dBm] | -7.6 dBm |
| Minimum extinction ratio [dB] | 3 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -5.4 dBm |
| Overload power (AVG) [dBm] | 2.4 dBm |
QSFP-40G-iSR4 (02310MHR)
Table 4-318 QSFP-40G-iSR4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-iSR4 |
| Part Number | 02310MHR |
| Model | QSFP-40G-iSR4 |
| Form factor | QSFP+ |
| Application standard | 40GBASE-SR4 |
| Connector type | MPO |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | - Multimode fiber (OM3) (with diameter of 50 μm): 100 m - Multimode fiber (OM4) (with diameter of 50 μm): 150 m |
| Modal bandwidth [MHz*km] | - Multimode fiber (OM3): 2000 MHz*km - Multimode fiber (OM4): 4700 MHz*km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Maximum Tx optical power [dBm] | 0.5 dBm |
| Minimum Tx optical power [dBm] | -7.6 dBm |
| Minimum extinction ratio [dB] | 3 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -9.5 dBm |
| Overload power (AVG) [dBm] | 2.4 dBm |
QSFP-40G-LX4
Table 4-319 QSFP-40G-LX4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-LX4 |
| Part Number | 02311HNP |
| Model | QSFP-40G-LX4 |
| Form factor | QSFP+ |
| Application standard | 40G-LX4 |
| Connector type | LC |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25 bit/s |
| Target transmission distance [km] | 0.15 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1271nm,1291nm,1311nm,1331nm |
| Maximum Tx optical power [dBm] | 2.3 dBm |
| Minimum Tx optical power [dBm] | -7 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -11.5 dBm |
| Overload power (AVG) [dBm] | 2.3 dBm |
QSFP-40G-ER4
Table 4-320 QSFP-40G-ER4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-ER4 |
| Part Number | 02311BKT |
| Model | QSFP-40G-ER4 |
| Form factor | QSFP+ |
| Application standard | 40GBASE-ER4 |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | 40 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1271nm, 1291nm, 1311nm, 1331nm |
| Maximum Tx optical power [dBm] | 4.5 dBm |
| Minimum Tx optical power [dBm] | -2.7 dBm |
| Minimum extinction ratio [dB] | 5.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -16.8 dBm |
| Overload power (AVG) [dBm] | 2.3 dBm |
QSFP-40G-LR4-Lite (02311YVB)
Table 4-321 QSFP-40G-LR4-Lite specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-LR4-Lite |
| Part Number | 02311YVB |
| Model | QSFP-40G-LR4-Lite |
| Form factor | QSFP+ |
| Application standard | 40GBASE-LR4 Lite |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 40Gbit/s |
| Target transmission distance [km] | 2 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1271nm, 1291nm, 1311nm, 1331nm |
| Maximum Tx optical power [dBm] | 2.3 dBm |
| Minimum Tx optical power [dBm] | -9 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -13.5 dBm |
| Overload power (AVG) [dBm] | 2.3 dBm |
QSFP-40G-LX4-MM
Table 4-322 QSFP-40G-LX4-MM specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-LX4-MM |
| Part Number | 02313NUG |
| Model | QSFP-40G-LX4-MM |
| Form factor | QSFP+ |
| Application standard | 40GBASE-LX4 |
| Connector type | LC |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 40Gbit/s |
| Target transmission distance [km] | Multimode OM3 optical fiber (diameter: 50 μm): 150 m Multimode OM4 optical fiber (diameter: 50 μm): 150 m |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1271nm, 1291nm, 1311nm, 1331nm |
| Maximum Tx optical power [dBm] | 2.3 dBm |
| Minimum Tx optical power [dBm] | -7.0 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -10.5 dBm |
| Overload power (AVG) [dBm] | 3.5 dBm |
QSFP-40G-eSDLC-PAM
Table 4-323 QSFP-40G-eSDLC-PAM specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-eSDLC-PAM |
| Part Number | 02311QTR |
| Model | QSFP-40G-eSDLC-PAM |
| Form factor | QSFP+ |
| Application standard | 40GBase-eSDLC-PAM4 |
| Connector type | MPO |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | - Multimode fiber (OM3) (with diameter of 50 μm): 100 m - Multimode fiber (OM4) (with diameter of 50 μm): 300 m |
| Modal bandwidth [MHz*km] | - Multimode fiber (OM3): 2000 MHz*km - Multimode fiber (OM4): 4700 MHz*km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Maximum Tx optical power [dBm] | 2.4 dBm |
| Minimum Tx optical power [dBm] | -2 dBm |
| Minimum extinction ratio [dB] | 3 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -8 dBm |
| Overload power (AVG) [dBm] | 2 dBm |
QSFP-40G-LR4 (02313URY)
Table 4-324 QSFP-40G-LR4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-LR4 |
| Part Number | 02313URY |
| Model | QSFP-40G-LR4 |
| Form factor | QSFP+ |
| Application standard | 40GBase-LR4 |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | 10 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1310 nm |
| Maximum Tx optical power [dBm] | 2.3 dBm |
| Minimum Tx optical power [dBm] | -7 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -11.5 dBm |
| Overload power (AVG) [dBm] | 2.3 dBm |
QSFP-40G-LR4-Lite (02313URS)
Table 4-325 QSFP-40G-LR4-Lite specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-LR4-Lite |
| Part Number | 02313URS |
| Model | QSFP-40G-LR4-Lite |
| Form factor | QSFP+ |
| Application standard | 40GBase-LR4 Lite |
| Connector type | LC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 40Gbit/s |
| Target transmission distance [km] | 2 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1271nm, 1291nm, 1311nm, 1331nm |
| Maximum Tx optical power [dBm] | 2.3 dBm |
| Minimum Tx optical power [dBm] | -9 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -13.5 dBm |
| Overload power (AVG) [dBm] | 2.3 dBm |
QSFP-40G-eSM4
Table 4-326 QSFP-40G-eSM4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-eSM4 |
| Part Number | 02311DTR |
| Model | QSFP-40G-eSM4 |
| Form factor | QSFP+ |
| Application standard | 40GBASE-eSM4 (non-standard) |
| Connector type | MPO/APC |
| Optical fiber type | SMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 40 Gbit/s |
| Target transmission distance [km] | Single-mode fiber: 10 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 1310 nm |
| Maximum Tx optical power [dBm] | 0.5 dBm |
| Minimum Tx optical power [dBm] | -8.2 dBm |
| Minimum extinction ratio [dB] | 3.5 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -12.6 dBm |
| Overload power (AVG) [dBm] | 0.5 dBm |
QSFP-40G-eSR4 (02313URU)
Table 4-327 QSFP-40G-eSR4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-eSR4 |
| Part Number | 02313URU |
| Model | QSFP-40G-eSR4 |
| Form factor | QSFP+ |
| Application standard | 40GBase-eSR4 |
| Connector type | MPO |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | - Multimode fiber (OM2) (with diameter of 50 μm): 82 m - Multimode fiber (OM3) (with diameter of 50 μm): 300 m - Multimode fiber (OM4) (with diameter of 50 μm): 400 m |
| Modal bandwidth [MHz*km] | - Multi-mode (OM2) optical fiber: 500 MHz*km - Multi-mode (OM3) optical fiber: 2000 MHz*km - Multi-mode (OM4) optical fiber: 4700 MHz*km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Maximum Tx optical power [dBm] | 0.5 dBm |
| Minimum Tx optical power [dBm] | -7.6 dBm |
| Minimum extinction ratio [dB] | 3 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -5.4 dBm |
| Overload power (AVG) [dBm] | 2.4 dBm |
QSFP-40G-iSR4 (02313URW)
Table 4-328 QSFP-40G-iSR4 specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | QSFP-40G-iSR4 |
| Part Number | 02313URW |
| Model | QSFP-40G-iSR4 |
| Form factor | QSFP+ |
| Application standard | 40GBase-SR4 |
| Connector type | MPO |
| Optical fiber type | MMF |
| Working case temperature [°C(°F)] | 0°C to 70°C |
| Transmission rate [bit/s] | 41.25Gbit/s |
| Target transmission distance [km] | - Multimode fiber (OM3) (with diameter of 50 μm): 100 m - Multimode fiber (OM4) (with diameter of 50 μm): 150 m |
| Modal bandwidth [MHz*km] | - Multi-mode (OM3) optical fiber: 2000 MHz*km - Multi-mode (OM4) optical fiber: 4700 MHz*km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | 850 nm |
| Maximum Tx optical power [dBm] | 0.5 dBm |
| Minimum Tx optical power [dBm] | -7.6 dBm |
| Minimum extinction ratio [dB] | 3 dB |
| Receiver Optical Characteristics | |
| Rx sensitivity (AVG) [dBm] | -9.5 dBm |
| Overload power (AVG) [dBm] | 2.4 dBm |
- QSFP-40G-LR4 (02310MHS)
- QSFP-40G-SDLC-PAM
- QSFP-40G-SR-BD (02311FPA)
- QSFP-40G-eSR4 (02310RMB)
- QSFP-40G-iSR4 (02310MHR)
- QSFP-40G-LX4
- QSFP-40G-ER4
- QSFP-40G-LR4-Lite (02311YVB)
- QSFP-40G-LX4-MM
- QSFP-40G-eSDLC-PAM
- QSFP-40G-LR4 (02313URY)
- QSFP-40G-LR4-Lite (02313URS)
- QSFP-40G-eSM4
- QSFP-40G-eSR4 (02313URU)
- QSFP-40G-iSR4 (02313URW)