No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Connection Mode for a CPOS Interface

Configuring the Connection Mode for a CPOS Interface


When CPOS interfaces of a Huawei device and a non-Huawei device are connected through optical fibers or using WDM, configure the connection mode for the CPOS interface.

A router provides three connection modes: Alcatel mode, Huawei mode, and Lucent mode. Configure the mode to suit the device connected to the CPOS interface.


When the E1/T1 links on all low-end devices are aggregated to the device's CPOS interface through an SDH/SONET network, you do not need to configure the connection mode for the CPOS interface.


  1. Run system-view

    The system view is displayed.

  2. Run controller cpos cpos-number

    The specified CPOS interface view is displayed.

  3. Run multi-channel align-mode { alcatel | huawei | lucent }

    The connection mode is configured for the CPOS interface.

    By default, the connection mode of a CPOS interface is Huawei.

Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21246

Downloads: 95

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next