No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Default APN (for a Specified SIM Card)

(Optional) Configuring the Default APN (for a Specified SIM Card)

Context

To ensure wireless connection security, some carriers require that devices connect to LTE networks through the default APN. In dual-card single-standby scenarios, the device connects to different carriers' LTE networks through corresponding default APNs, improving network reliability. You can determine whether to configure the default APN for a carrier's LTE network based on the carrier's requirements. By default, no default APN is configured for an LTE network.

NOTE:

LTE data cards E8278, K5150, and EC25 do not support Configuring the Default APN (for a Specified SIM Card).

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface cellular interface-number

    The LTE cellular interface view is displayed.

  3. Run profile create lte-default apn [ user username password password authentication-mode { chap | pap } ] sim-id sim-id

    The default APN is configured for an LTE network.

    By default, no default APN is configured for an LTE network.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20931

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next