No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interface Numbering Rules

Interface Numbering Rules

Physical Interface Numbering Rules

On the AR router, interfaces are numbered in the format of slot ID/subcard ID/interface sequence number.

  • Slot ID

    The slot ID identifies in which slot a card is installed.

    • The SRU slot is 0.
    • When slots need to be combined into one slot, the larger slot ID is used as the new slot ID. For example, when slot 1 and slot 2 are combined, slot ID 2 is used as the new slot ID.
  • Subcard ID

    The subcard ID specifies the ID of a subcard. The AR router does not support subcards. Therefore, the subcard ID of the AR router is always 0.

  • Interface sequence number

    The interface sequence number indicates the number of each interface on a card.

    • If there is only one row of interfaces on a card
      • For AR100&AR120&AR160 series, AR1200 series, AR2200 series, AR3200 and AR3600 series, these interfaces are numbered from left to right starting with 0.

      • For AR150&AR200 series, these interfaces are numbered from right to left starting with 0.

    • If there are two rows of interfaces on a card,
      • For AR160 series, AR1200 series, AR2200 series, AR3200 and AR3600 series, these interfaces are numbered from bottom to top and left to right starting with 0.

      • For AR150&AR200 series, these interfaces are numbered from bottom to top and right to left starting with 0.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21223

Downloads: 95

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next