No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the CRC Field Length

Setting the CRC Field Length

Context

CRC is a commonly used method to detect transmission errors in a communication system. It checks for transmission errors by adding redundancy codes to the original data. Transmission errors are more likely to be detected when more redundancy codes are added, but data is transmitted at a lower efficiency.

Ensure that the same CCR field length is configured for both devices on the link. Otherwise, the two devices cannot be connected.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface pos interface-number

    The POS interface view is displayed.

  3. Run crc { 16 | 32 }

    The CRC field length is configured for the POS interface

    By default, the CRC field length is 32 bits.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 22845

Downloads: 127

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next