No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparations

Preparations

Procedure

  1. Apply for 3G service such as obtain the user name, password, and APN to access the 3G network, and a SIM, USIM, or UIM card from the carrier.
  2. Install the SIM, USIM, or UIM card into a 3G data card/3G model/3G interface card.

    NOTE:

    Ensure that the SIM, USIM, or UIM card is not damaged before installation and is installed properly after installation.

    For details on how to install or replace the SIM, USIM, or UIM card of the 3G interface card, see Replacing a SIM Card (on a Card) in Huawei AR100&AR120&AR150&AR160&AR200&AR1200&AR2200&AR3200&AR3600 Series Enterprise Routers Hardware Installation and Maintenance Guide - Maintaining a Router.

    The 3G model provides the SIM card slot in which the SIM/USIM/UIM card can be installed.

  3. Install the 3G interface card on the device.

    NOTE:

    Ensure that the 3G interface card is not damaged before installation and is installed properly after installation.

    For details on how to install or replace the 3G interface card, see Replacing a Card in Huawei AR100&AR120&AR150&AR160&AR200&AR1200&AR2200&AR3200&AR3600 Series Enterprise Routers Hardware Installation and Maintenance Guide - Maintaining a Router.

  4. Install 3G antennas on the 3G interface card or 3G model.

    NOTE:

    The angel of antennas affects signal receiving and sending. To better send and receive wireless signals, the antennas need to be positioned to a proper angel. For details on how to install 3G antennas on the AR100&AR120&AR150&AR160&AR200 series routers, see (Optional) Installing Antennas in Huawei AR100&AR120&AR150&AR160&AR200&AR1200&AR2200&AR3200&AR3600 Series Enterprise Routers Hardware Installation and Maintenance Guide - Installing AR100/AR120/AR150/AR160/AR200 Series Routers.

  5. Check whether the indicator on the 3G models/3G interface cards works normally.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20839

Downloads: 91

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next