No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting a 3G Modem After Several Consecutive Dial-up Failures

Restarting a 3G Modem After Several Consecutive Dial-up Failures

Context

When the dial-up on a 3G cellular interface fails for several consecutive times, you can set the maximum number of dial-up failures. When the number of consecutive dial-up failures reaches the maximum value, the device restarts the 3G modem for automatic fault recovery.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the interface cellular interface-number command to enter the 3G cellular interface view.
  3. Run the modem auto-recovery dial action modem-reboot fail-times times command to set the maximum number of dial-up failures. When the number of consecutive dial-up failures reaches the maximum value, the device restarts the 3G modem.

    NOTE:

    It is recommended that the maximum number of consecutive dial-up failures should be less than 8.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 22871

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next