No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Frame Format for a POS Interface

Configuring the Frame Format for a POS Interface


SDH and SONET are different standards defined by different organizations, but their content and functions are similar. SDH is mainly used in Europe and China and SONET is mainly used in North America and Japan. Different device manufacturers provide different default configurations for them.

Configure the POS interface frame format based on the standard used locally.


  1. Run system-view

    The system view is displayed.

  2. Run interface pos interface-number

    The POS interface view is displayed.

  3. Run frame-format { sdh | sonet }

    The frame format is configured for the POS interface.

    By default, the frame format of the POS interface is SDH.

Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 22947

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next