No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for T1-F Interfaces

Application Scenarios for T1-F Interfaces

As shown in Figure 9-1, the headquarters and branch of an enterprise are connected by the transmission network of a carrier. A low-rate (512 kbit/s for example) T1 channel is required to transmit services of the enterprise. In this scenario, timeslots in the T1 line need to be bundled into a channel. For example, 16 timeslots are bundled to transmit the data service.

Figure 9-1  Connecting to a transmission network through a T1 channel

Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21190

Downloads: 95

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next