No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for G.SHDSL Interface

Default Settings for G.SHDSL Interface

This section describes the default settings for the G.SHDSL interface.

Table 18-1  Default settings for the G.SHDSL interface

Parameter

Default Setting

Transmission mode

ATM

Interface status

Up

Working mode

CPE

Transmission standard

G.991.2 Annex A, G.991.2 Annex F, and G.991.2 Annex B, and G.991.2 Annex G

Power spectral density (PSD) mode

Symmetric

Transmit power

Auto

Board capability

Auto

Modulation mode

Auto

Binding mode

Auto-enhanced

Maximum rate

15296 kbit/s

Minimum rate

192 kbit/s

Actual uplink SNR

6 dB

Actual downlink SNR

6 dB

Lowest uplink SNR

0 dB

Lowest downlink SNR

0 dB

Line probing function

Enabled

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21404

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next