No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the WWAN Log Function

Enabling the WWAN Log Function

Context

To view changes of the 3G signal strength, cell ID, or network type in WWAN logs, you can enable the WWAN log function and check WWAN logs.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run cellular log enable

    The WWAN log function is enabled.

    By default, the WWAN log function is disabled.

    After the WWAN log function is enabled, you can view changes of the 3G signal strength, cell ID, or network type in WWAN logs.
    • When the 3G signal strength changes, the device records the WWAN/5/WWAN_RSSI_NORMAL log or the WWAN/5/WWAN_RSSI_WEAK log.
    • When the cell ID changes, the device records the WWAN/5/WWAN_CELLID log.
    • When the network type changes, the device records the WWAN/5/WWAN_NETWORK log.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20896

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next