No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the WWAN Log Function

Enabling the WWAN Log Function


To view changes of the cell ID or network type in WWAN logs, you can enable the WWAN log function.


  1. Run system-view

    The system view is displayed.

  2. Run cellular log enable

    The WWAN log function is enabled.

    By default, the WWAN log function is disabled.

    After enabling the WWAN log function, you can view changes of the cell ID or network type in WWAN logs.
    • When the cell ID changes, the device records the WWAN/5/WWAN_CELLID log.
    • When the network type changes, the device records the WWAN/5/WWAN_NETWORK log.

Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21267

Downloads: 95

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next