No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Function of Receiving and Sending SMS Messages

(Optional) Configuring the Function of Receiving and Sending SMS Messages

Context

The device can use the SMS to send SMS messages to users and save SMS messages received from users in the SIM card. You can check received SMS messages on the device. If the number of SMS messages saved in the SIM card exceeds the maximum number, you can delete the SMS messages.

Procedure

  • Sending SMS messages

    The device can use the SMS to send SMS messages to a user with a specified mobile number. You need to specify the short message center (SMC) number when configuring the device to send SMS messages.

    1. Run system-view

      The system view is displayed.

    2. Run sms send interface cellular interface-number destination-telephone-number

      An SMS message is sent to a specified destination number.

    3. Run interface cellular interface-number

      The cellular interface view is displayed.

    4. Run sms service-center-address service-center-number

      The SMC number is configured on the cellular interface.

      By default, no SMC number is configured on the cellular interface.

  • Receiving SMS messages

    The device saves SMS messages received from users in the SIM card. You can check and delete received SMS messages.

    • Check received SMS messages.

      Run display sms interface cellular interface-number { brief | id sms-id | verbose }

      Received SMS messages are displayed.

    • Delete received SMS messages.

      1. Run system-view

        The system view is displayed.

      2. Run sms delete interface cellular interface-number { sms-id | all }

        SMS messages saved in the SIM card are deleted.

Verifying the Configuration

  • Run the display sms interface cellular interface-number statistics command to check statistics about SMS messages.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20998

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next