No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The router connects to an ISDN network through ISDN BRI interfaces

The router connects to an ISDN network through ISDN BRI interfaces

In Figure 13-1, RouterA and RouterB use ISDN BRI interfaces to connect to the NT1 devices, and the NT1 devices connect to the ISDN network.

NOTE:

For details about ISDN service configuration, see ISDN Configuration in the Configuration Guide - WAN.

NT1 implements physical layer functions, including subscriber line transmission, loop detection, and D channel preemption. For details, see ISDN Reference Model in Configuration Guide - WAN.

Figure 13-1  The router connects to an ISDN network through ISDN BRI interfaces.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20940

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next