No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Link-Layer Protocol for a POS Interface

Configuring the Link-Layer Protocol for a POS Interface

Context

Ensure that the same link-layer protocol is configured for both devices on the link. Otherwise, the two devices cannot be connected.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface pos interface-number

    The POS interface view is displayed.

  3. Run link-protocol { fr | hdlc | ppp }

    The link-layer protocol is configured for the POS interface.

    By default, the link-layer protocol of a POS interface is PPP.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21345

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next