No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Can the E1-F Card Communicate with the E1-M Card?

Can the E1-F Card Communicate with the E1-M Card?

The E1-F card can communicate with the E1-M card in the following scenarios:

  • The E1-M card works in E1 mode and the E1-F card works in unframed mode.
  • The E1-M card works in CE1 mode and the E1-F card works in framed mode. Only one channel set is created on the E1-M card and binds the same timeslots as the E1-F card.
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20941

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next