No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Activating a VDSL Interface

Activating a VDSL Interface


Deactivating a VDSL interface disconnecting it from the DSLAM. To enable the VDSL interface to transmit services, reactivate this VDSL interface.


  1. Run system-view

    The system view is displayed.

  2. Run interface ethernet interface-number

    The view of the VDSL interface working in ATM mode is displayed.

  3. Run undo shutdown

    The VDSL interface is activated.

Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 22950

Downloads: 129

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next