No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for Ethernet Interfaces

Licensing Requirements and Limitations for Ethernet Interfaces

This section describes specifications of Ethernet interfaces.

Involved Network Elements

None.

Licensing Requirements

Ethernet Interface is a basic capability of an AR router and is not under license control.

Feature Limitations

The settings of the SPEED and DUPLEX parameters and auto-negotiation mode must be the same at the local and peer ends. Otherwise, negotiation may fail.

The AR120 series, AR161, AR161W, AR161EW, AR161EW-M1, AR161G-L, AR161G-Lc, AR161G-U, AR169, AR169W, AR169EW, AR169CVW, AR169EGW-L, AR169CVW-4B4S, AR169G-L, AR169-P-M9, AR169W-P-M9, AR169RW-P-M9 do not support the VCT configuration.

Interfaces on the 4GE-2S cards do not support the VCT configuration.

The AR100&AR120&AR150&AR160&AR200 series, AR1200 series, AR2220E, AR2201-48FE, AR2202-48FE, AR2204-51GE-P, AR2204-51GE-R, AR2204-27GE-P, AR2204-27GE, AR2204E, AR2204E-D, and AR2204 only support isolation at Layer 2 and interworking at Layer 3.GE0/0/3 to GE0/0/26 on the AR2204-51GE-P and AR2204-51GE-R cannot be isolated from GE0/0/27 to GE0/0/50.

An interface on the 4GE-2S, 9ES2, 4ES2G-S or 4ES2GP-S card cannot be isolated from an interface on other cards.

The GE interfaces on the AR2201-48FE, AR2202-48FE, AR2204-51GE-P, AR2204-51GE-R, AR2204-27GE-P, AR2204-27GE, AR2204E, AR2204E-D and AR2204 do not support flow control.

The interface on 8FE1GE card support configuring the IFG and interface isolated.

AR2200&AR3200 series support configuring the IFG and interface isolated.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21011

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next