No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for PON Interfaces

Licensing Requirements and Limitations for PON Interfaces

This section describes licensing requirements and limitations for PON interfaces.

Involved Network Elements


Licensing Requirements

PON interfaces is a basic capability of an AR router and is not under license control.

Feature Limitations

The 1PON interface card supports PON interfaces. For the mapping between the device and interface card, see 1PON (1-Port GPON/EPON Dual-Mode Interface Card) in the Huawei AR100&AR120&AR150&AR160&AR200&AR1200&AR2200&AR3200&AR3600 Series Enterprise Routers Get to Know the Product-Hardware Description-Cards-xDSL/xPON Interface Card.

Different vendors have proprietary mechanisms for implementing the PON technology on OLTs. PON cards or modules can only be interconnected with Huawei's DSLAMs.

Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20910

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next