No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Synchronous Serial Interface

Configuring a Synchronous Serial Interface

Configuring a synchronous serial interface includes setting physical and link layer parameters for the synchronous serial interface.

Pre-configuration Tasks

Before configuring a synchronous serial interface, complete the following task:

  • Install an 1SA, 2SA, or 8SA interface card on the device and ensuring that it is registered successfully; or power on the AR162F and AR2202-48FE and ensure that their self-tests are successful.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21136

Downloads: 95

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next