No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deactivating a G.SHDSL Interface

Deactivating a G.SHDSL Interface

Context

After the device starts, its G.SHDSL interface is automatically activated. The G.SHDSL interface remains activated as long as its G.SHDSL line works properly. To enable a CPE to communicate with a DSLAM, deactivate the G.SHDSL interface on the CPE, set parameters such as the transmission standard, interface binding mode, PSD mode, and line probing function for the interface, and then reactivate this interface to make configurations take effect.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run either of the following commands to enter the G.SHDSL interface view.
    • If the transmission mode is set to ATM, run:
      interface atm interface-number
    • If the transmission mode is set to PTM, run:
      interface ethernet interface-number
  3. Run shutdown

    The G.SHDSL interface is deactivated.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20704

Downloads: 89

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next