No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Traffic Statistics on a T1-F Interface

Clearing Traffic Statistics on a T1-F Interface

Context

To monitor the status of an interface or locate faults on the interface, you can collect traffic statistics on the interface. Before collecting traffic statistics on the serial interface generated by a T1-F interface, clear the existing traffic statistics on this interface.

Interface statistics cannot be restored after they are cleared.

Procedure

  • Run the reset counters interface serial [ interface-number ] command in the user view to clear statistics about the serial interface generated on the T1-F interface.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20709

Downloads: 89

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next