No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Communication and VoIP Communication Using LTE Multi-APN

Data Communication and VoIP Communication Using LTE Multi-APN

As shown in Figure 12-9, Router is the egress gateway of an enterprise. Two APN profiles can be created, each of which is bound to an LTE channel interface. One APN connects to the Internet for data communication, and the other connects to the IMS for VoIP communication. QoS is configured to control quality of data and voice services.

Figure 12-9  LTE multi-APN Scenario

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20907

Downloads: 93

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next