No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Overview of ISDN BRI Interfaces

Overview of ISDN BRI Interfaces

This section describes basic concepts, attributes and usage scenarios of ISDN BRI interfaces.

Basic concepts of ISDN BRI Interfaces

Integrated Services Digital Network (ISDN) evolves from the Integrated Digital Network (IDN). The Integrated Services Digital Network (ISDN) provides end-to-end digital connections and supports a wide range of services, including voice, high-speed fax, video phone, intelligent telegraph, and teletext services.

ISDN provides users with a set of user-network interfaces (UNIs) to connect different terminals such as phones, fax machines, computers to ISDN networks. ITU-T I.412 defines two types of interfaces: Basic Rate Interfaces (BRI) and Primary Rate Interfaces (PRI).

  • A BRI interface contains two 64 kbit/s B channels and one 64 kbit/s D channel (BRI interface bandwidth = Bandwidth of two B channels + Bandwidth of one D channel). The two B channels (B1 channel and B2 channel) can be used independently or be bundled by using the MP technique to provide a maximum of 128 kbit/s transmission rate.

  • PRI interfaces are classified into CE1/PRI interfaces and CT1/PRI interfaces: For the configuration of a CE1/PRI interface, see CE1/PRI Interface Configuration; for the configuration of a CT1/PRI interface, see CT1/PRI Interface Configuration.

NOTE:

Both BRI and PRI interfaces contain data channels (B channels) and signaling channels (D channels). B channels transmit data of upper layer applications, and D channels transmit all ISDN signaling packets.

Attributes of ISDN BRI Interfaces

ISDN BRI interfaces have the following characteristics:

  • Comply with the S/T interface standard.
  • Use PPP and FR as link layer protocols.
  • Use IP as the network-layer protocol.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21277

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next