No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of LTE Cellular Interface Configuration Tasks

Summary of LTE Cellular Interface Configuration Tasks

This section describes configuration tasks of LTE cellular interfaces.

To configure LTE cellular interfaces, set the interface connection parameters and configure C-DCC for dial-up connection so that the LTE cellular interfaces can connect to the LTE network. You can also configure the PIN management function to ensure security of SIM cards.


This chapter describes the connection parameters of LTE cellular interfaces, C-DCC for dial-up connection, and PIN management. Based on enterprise service requirements, you probably need to configure PPP, DHCP, DNS, NAT, firewall, and backup interface functions. For details, see relevant configuration guides.

Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 21326

Downloads: 97

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next