No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Attributes of a GPON Interface

Configuring Attributes of a GPON Interface

To enable the router to communicate with an upstream optical line terminal (OLT), you must correctly configure attributes of the GPON interface connected to the OLT.

Pre-configuration Tasks

Before Configuring a GPON interface, complete the following task:

  • Installing a PON interface card on the router and ensuring that it is registered successfully

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 20673

Downloads: 89

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next