No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - Interface Management

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the CPOS Interface Configuration

Verifying the CPOS Interface Configuration

Procedure

  • Run the display controller cpos [ cpos-number ] command to view the physical layer configurations of the CPOS interface and all E1/T1 channels.
  • Run the display cpos multi-channel align-mode command to view the multiplexing path tributary unit groups (TUGs) of an E1/T1 channel.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100069331

Views: 22721

Downloads: 127

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next