No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - IP Multicast

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the basic concepts, configuration procedures, and configuration examples of the interfaces supported by the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
References for PIM

References for PIM




RFC 4601

Protocol Independent Multicast - Sparse Mode (PIM-SM)


RFC 5059

Bootstrap Router (BSR) Mechanism for PIM


RFC 3973

Protocol Independent Multicast - Dense Mode protocol


RFC 4607

Source-Specific Multicast for IP


RFC 4610

Anycast-RP Using Protocol Independent Multicast (PIM)


RFC 3569

An Overview of Source-Specific Multicast (SSM)


RFC 4608

Source-Specific Protocol Independent Multicast in 232/8


RFC 3956

Embedding the Rendezvous Point (RP) Address in an IPv6 Multicast Address


Updated: 2019-03-06

Document ID: EDOC1100069332

Views: 22082

Downloads: 59

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next